Cutting Edges E27 Lamp Holder Gauge For Detecting Side Contacts

Description

Detail Information

Brand Name: Kingpo Standard: IEC60061-3 HRC: C58 To C60 Material: Hardness Steel High Light:

Go No Go Gauge

,

Iec 60061 3

Product Description

E27 Lampholder Gauges | Gauge for Detecting Side-contacts with Cutting-Edges in Lampholders E27 | 7006-22B-1

 

 

Purpose:

 

to detect the existance of cutting-edges on side-contact in E27 lamp holder.

 

Testing:

 

the gauge is screwed home in the lampholder as far as it will go. The combination is then placed with the plunger of the gauge in a horizontal position and the plunger-face is held against the helder contacts.

In this position it shall be possible to rotate the plunger in a clockwise and an anti-clockwise direction for at least an angle of 60° in both directions.

After this test the combination is placed with the plunger in a vertical position and the plunger-face is pressed against the holder contacts with a total force of 10N.

In this position it shall be possible to rotate the plunger in a clockwise and an anti-clockwise direction for at least an angle of 60° in both directions.

The lampholder complies if the torque applied for both tests does not exceed 0.4Nm.

 

 

Related gauges for E27 lamp holder:

 

E27 lamp holder gauge	"GO" GAUGE FOR LAMPHOLDERS E27	7006-25A-2
	NOT GO”GAUGE FOR SCREW THREADS OF LAMPHOLDERS E27	7006-26-4
	GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS E27	7006-21-5
	GAUGE FOR TESTING CONTACT-MAKING AND PROTECTION AGAINST ACCIDENTAL CONTACT DURING INSERTION OF LAMPS IN LAMPHOLDERS E27	7006-22A-5
	GAUGE FOR DETECTING SIDE-CONTACTS WITH CUTTING-EDGES IN LAMPHOLDERS E27	7006-22B-1
	GAUGE I FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27	7006-22C-1
	GAUGE II FOR CHECKING SIDE-CONTACT RESILIENCY IN LAMPHOLDERS E27	7006-22D-1