Pink Noise Generator IT Test Equipment IEC 60065 Clause 4.2 and 4.3 and IEC 62368-1 Annex E
Product Details:
| Place of Origin: | Sweden |
| Brand Name: | Kingpo |
| Certification: | Calibration Certificate |
| Model Number: | Model 8280 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 |
|---|---|
| Price: | To be quoted |
| Packaging Details: | safety carton pack or plywood box |
| Delivery Time: | 7 work days |
| Payment Terms: | T/T |
| Supply Ability: | 10 set/ month |
- Description
- Reviews (0)
Description
Detail Information
tv test equipment
,
tv signal tester
Product Description
This Pink Noise Generator meets the requirements for pink noise in IEC 60065, Clause 4.2 and 4.3 and IEC 62368-1, Annex E.
It is especially developed for all types of tone frequency amplifiers,when you need 2 channels/phase 90°
Pink Noise Generator Manual V2.6-G.docx
Technical Specification
•Pink noise or sine wave 1000 Hz (not at the same time)
•Two output channels when testing
•The channels can be phase shifted to 0° or 90°
•Fine adjustments of output voltage
•RCA and 4 mm banana type output connectors
•Audio-cables for test object included (RCA and 3,5 mm phono)
•Output signal according to IEC 60065 Annex C, fig. C1 (IEC60268)
•Amplitudes of sine wave and pink noise according to table below:
Output Voltage Sine wave 1 kHz Filtered pink noise
Low: 0-100 mV/1 kohm 0-35 mV rms/1 kohm
Medium: 0-1 V/1 kohm 0-350 mV rms/1 kohm
High: 0-5 V/1 kohm 0-1,7 V rms/1 kohm
|
IEC 62368-1 TESTING AND MEASURING EQUIPMENT |
|||||
| No. | Items | Description | Photo | Qty | Brand |
| 1 | Temperature and humidity chamber | IEC62368-1-cl.4.1.4 Model:KP-HWS1000L |  |
1 | KingPo |
| 2 | Test Apparatus for device forming mains plug |
IEC62368-1-cl.4.7 Model :KP-LJ220 Technical Parameter: 1. As per IEC60065-fig11 2. Weight: 1N, 2N. 3. Socket:UK, EU. 4. Arm of force 0-320mm 5.mension: 350*150*150 mm |
 |
1 | KingPo |
| 3 | Jointed test probe for equipment likely to be accessible to children | IEC62368-1-cl.4.8 IEC 62368 -1-Figure V.1 |  |
1 | KingPo |
| 4 | Unjointed test probe | IEC62368-1-cl.4.8 IEC62368-Annex V.1.3 Test method 2 |  |
1 | KingPo |
| 5 | Test hook | IEC 62368-Figure 20 |  |
1 | KingPo |
| 6 | Flat surface | IEC62368-1-cl.4.8.4.6 size:100 mm by 250 mm) |  |
1 | KingPo |
| 7 | Measuring network, touch current weighted for perception or reaction | IEC 60990 figure 4 |  |
1 | KingPo |
| 8 | Measuring network, touch current weighted for let-go | IEC 60990 figure 5 |  |
1 | KingPo |
| 9 | 2kΩ resistor | 2kΩ±2% |  |
1 | KingPo |
| 10 | Jointed test probe for equipment not likely to be accessible to children | Test probes V2 |  |
1 | KingPo |
| 11 | Blunt probe | Test probes V3 |  |
1 | KingPo |
| 12 | Wedge probe | Test probes V4 |  |
1 | KingPo |
| 13 | Terminal probe | Test probes V5 |  |
1 | KingPo |
| 14 | Winding hot resistance tester | IEC62368-1-cl.5.4.1.4, Model:RC3002 Measuring range: 0.500~99.99Ω,±(-0.2% reading +5 D). 99.99~2000Ω±(-0.2% reading +2 D). 2000~10000Ω±(-0.2% reading +1 D). Power supply:AC220V, 50/60Hz , Size:380(W)×340(D)×120(H) |  |
1 | KingPo |
| 15 | Pink Noise Generator | Pink Noise according to IEC62368-1- Annex E http://www.batterytestingmachine.com/sale-10623142-pink-noise-generator-it-test-equipment-iec-60065-clause-4-2-and-4-3-and-iec-62368-1-annex-e.html |  |
1 | KingPo |
| 16 | Scratch test device with steel pin | Annex G 13.6.2 http://www.batterytestingmachine.com/sale-11991421-iec-60950-1-clause-2-10-8-4-automatic-abrasion-resistance-tester-printed-circuit-abrasion-strength-d.html |  |
1 | KingPo |
| 17 | Vicat test B 50 of ISO 306 | IEC62368-1-cl.5.4.1.10 Dimension: 720mm×700mm×1380mm Temperatrue: RT+10~300℃ Maximum temperature indication error :0.1℃ Temperature indication precision: ±0.5℃ Deformation measurement range: 0—1.0mm Resolution:0.01mm Sample holder number: 3 sets Power: 4Kw Power supply: 220VAC 50Hz |
 |
1 | KingPo |
| 18 | Ball pressure test apparatus | IEC62368-1-cl.5.4.1.10 http://www.batterytestingmachine.com/sale-11226669-iec-60695-10-2-2014-ball-pressure-tester-with-test-specimen-support-hot-deformation-capacity.html |  |
1 | KingPo |
| 19 | circuit 1 of Table D.1._Impulse test generator | IEC62368-1-cl.5.4.2.3.2.5 IEC 62368-1/Ed3-Figure D.1 Model:1950S |  |
1 | KingPo |
| 20 | circuit 3 of Table D.1._Impulse test generator | IEC62368-1-cl.5.4.2.3.2.5 IEC 62368-1/Ed3-Figure D.2 Model:KP-PRM65 |  |
1 | KingPo |
| 21 | Tracking Index Tester | IEC62368-1-cl.5.4.3 Model:KP-FT02 |  |
1 | KingPo |
| 22 | Mandrel test | IEC62368-1-cl.5.4.4.6.5 IEC 62368-1- Figure 25-28 Weight:100N*1,50N*1( the pulling force of 50N, 100N, 150N can be achieved Rotate angle:230° Test mandrel:Triangle bar with a tip |  |
1 | KingPo |
| 23 | Electric Strength Test | Dielectric strength tester Made accord to IEC 62368-1-Figure 29, IEC60065, UL1310 standards Pole diameter: 5 ± 0.1mm Metal club weight: 100 ± 2g |
 |
1 | KingPo |
| 24 | Non-inductive Resistor 5000Ω and Ampere meter | IEC62368-1-cl.5.4.11 |  |
1 | KingPo |
| 25 | Source with at least 1500A short circuit | IEC62368-1-cl.5.6.4.1 (Annex R) http://www.batterytestingmachine.com/sale-12593671-250v-it-test-equipment-limited-short-circuit-test-iec-62368-1-annex-r.html |  |
1 | KingPo |
| 26 | Cheesecloth bleached cotton cloth 40g/m2 | IEC62368-1-cl.6.4.8.3.3 |  |
1 | KingPo |
| 27 | Needle Flame Tester | IEC62368-1-Annex S.2 Model:KP-FT03 |  |
1 | KingPo |
| 28 | Dark sticky mat, magnified glass with a resolution of 0,1 mm | Conform to IEC 62368-1-cl.8.5.5.2. |  |
1 | KingPo |
| 29 | magnified glass with a resolution of 0,1 mm Conform to IEC 62368-1-cl.8.5.5.2. Magnification:20x Resolution:0.1mm |
|
1 | KingPo | |
| 30 | circular plan surface φ30mm | IEC62368-1-T.4 |  |
1 | KingPo |
| 31 | Flat surface | IEC 62368-1-cl.8.6.2.3. flat surface 12.5cm by 20cm |  |
1 | KingPo |
| 32 | 800N=330N(item 1 can be used) +100N(item 3 can be used)+150N+200N+flat surface (20N) | 1 | KingPo | ||
| 33 | Inclined plane 10° | IEC 62368-1-cl.8.6.4. 1, Tilt angle :0-30 °equipped with angle measuring instrument calibration, easy to operate, high accuracy angle, precision ± 0.5 ° 2, The maximum weight load: 50kg 3, Table size: 1000*1000mm. 4.Glass Thickness:10mm |
 |
1 | KingPo |
| 34 | 75mm width strap | Conform to IEC 62368-1-cl.8.8 |  |
1 | KingPo |
| 35 | circular plan surface φ30mm | IEC62368-1-cl.8.10.3 |  |
1 | KingPo |
| 36 | Steel disk | IEC 62368-1-cl.9.6.3 IEC CDV 62368-1/Ed3-Figure 47(including thermocouples) |  |
1 | KingPo |
| 37 | Aluminium ring | IEC 62368-1-cl.9.6.3 IEC CDV 62368-1/Ed3-Figure 48(including thermocouples) |  |
1 | KingPo |
| 38 | Aluminium foil | IEC 62368-1-cl.9.6.3 IEC CDV 62368-1/Ed3-Figure 49(including thermocouples) |  |
1 | KingPo |
| 39 | Covering of ventilation openings |
IEC 62368-Annex B.3.2 piece of card with minimum 200 g/m² density |  |
1 | KingPo |
| 40 | Wrapping Tissue | 12g/ m2 – 30g/m2 |  |
1 | KingPo |
| 41 | Cord Pull test | IEC 62368-AnnexG.7.3.2.11, Power Supply: AC220V 50HZ; 2, Pull weight: 20N*2,30N*2( the pulling force of 30N,60N,80N,100N can be achieved); 3, Torque weight: 5N*1, 12.5N*1, 17.5N*1 (0.1Nm,0.25Nm,0.35Nm); 4, Tension times: 0~9999(selectable),25 times is by default; 5, Tension frequency: 1 times/s; 6, Torque time: 0.01S～99 hours 99 mins; |
 |
1 | KINGPO |
| 42 | impact test | IEC 62368-Annex T.6 φ50mm/500g± 25g steel ball,
|
 |
1 | KINGPO |
| 43 | Drop test | IEC 62368-Annex T.7 Hard wood 13mm on 18mm ± 2mm plywood, two layers |  |
1 | KINGPO |
| 44 | Centre punch for Fragmentation test | IEC 62368-Annex T.10 1.Weight: 75 g ± 5 g 2. Material: conical tungsten 3. Feature: a carbide tip with an angle of (60 ± 2)° |
 |
1 | KINGPO |
| 45 | Vicat softening test apparatus | Dimension: 720mm×700mm×1380mm Temperatrue: RT+10~300℃ Maximum temperature indication error :0.1℃ Temperature indication precision: ±0.5℃ Deformation measurement range: 0—1.0mm Resolution:0.01mm Sample holder number: 3 sets Power: 4Kw Power supply: 220VAC 50Hz |
 |
1 | KINGPO |
Reviews
There are no reviews yet.