Balance Car Electric Motor Testing System , DC Motor Loading Test System

Description

Detail Information

Communication: GPIB Port Transmission: Collecting 100 Torque Speed Points Per Second Adjustment: DSP Chip PID Sampling Speed: 5-10PCS/S&20PCS/S&100PCS/S Communication Method: RS-232&USB2.0&GPIB/RS232 Cabinet: L600*W600*H1015 High Light:

electric motor testing equipment

,

brushless motor tester

Product Description

 

Balance Car Electric Motor Testing System , DC Motor Loading Test System

 

Name: Balance car DC motor loading test system

Model: CMT-2010HAZQ

Product introduction:

CMT-2010 HAZQ is a set of conditions for testing the motor of the analog balance car under different load conditions. The test system allows the engineer to set different loading scenarios in the test software, such as user weight, uphill, downhill, etc. The system can be loaded according to the curve set by the user.

 

Features

1. With manual loading, automatic loading, fixed-point torque test, full test and other functions,

2. Ability to output and save data reports and curve reports. If you need to customize the report form, please provide the corresponding template. If not provided, the report will be output according to our default template.

3. Communication with GPIB port, fast transmission speed, collecting 100 torque speed points per second. Use DSP chip PID adjustment. Easy to adjust

 

Selection reference

Controller model	Sampling speed	Available Communication Protocol	Communication Method	Providing Test Software	Features
HDC-1010	5-10PCS/S	Yes	RS-232	no	Simple operation, low price, suitable for ordinary production lines
HDC-1010-S	5-10PCS/S	Yes	RS-232	Yes
HDC-1020	20PCS/S	no	USB2.0	Yes	Fast collection speed and wide test range, suitable for common production lines and common experiments
HDC-1030	25PCS/S	no	USB2.0	Yes
HDC-1040	100PCS/S	no	GPIB/RS232	Yes	Fast acquisition speed, wide test range and strong anti-interference performance, suitable for production lines and laboratories with high requirements
HDC-2010	100PCS/S	no	GPIB/RS232	Yes

 

Software introduction

Configuration

No.	Component	Technical requirements
1	Dynamometer controller	Dynamometer Controller Speed: Accuracy reaches 0.01% of reading from 10-100000RPM. Communication with GPIB port, fast transmission speed, 100 torque points per second. Can be adjusted by the host computer PID.
2	Industrial control computer with 19-inch display	Industrial control computer with 19-inch display Inter CPU; 4G or above running memory; 500G or above hard drive ASUS motherboard.
3	Dynamometer	Natural cooling; torque 1.2KG ~ 6Kg.cm, torque accuracy ± 0.5% FS; speed 10 ~ 3600rpm, speed accuracy ± 0.2% FS. The short-term (within 5 minutes) operating power is 1400W and the long-term operating power is 300W.
4	Dynamometer	Natural cooling; torque 0.6 ~ 3Kg.cm, torque accuracy ± 0.5% FS; speed 10 ~ 3600rpm, speed accuracy ± 0.2% FS. The short-term (within 5 minutes) operating power is 1400W and the long-term operating power is 300W.
5	Dynamometer	Natural cooling; torque 100g ~ 500g.cm, torque accuracy ± 0.5% FS; speed 100 ~ 25000 rpm, speed accuracy ± 0.2% FS. The short-term (within 5 minutes) operating power is 1400W and the long-term operating power is 300W.
6	Cabinet	L600*W600*H1015
7	Signal converter	Connect three dynamometers, manually select the dynamometer you need to use, and the system will automatically convert all signals.
8	Motor fixture	Fine adjustment up and down
9	testing software	Chinese interface; with manual loading, automatic loading, fixed-point torque test, full-test test and other functions, can output and save data report and curve report function. If you need to customize the report form, please provide the corresponding template. If not provided, output the report according to our default template.