IP Testing Per IEC Standard 60529，Ingress Protection (IP)Testing Equipment Per IEC Standard 60529，

Description

Detail Information

Drip Area:800*800mmOscillating Tubes:Φ400mmDrip Hole Aperture:0.4mmDrip Rate:1mm/min Or 3mm/min AdjustableIPX5 Nozzle Diameter:6.3mmIPX6 Nozzle Diameter:12.5mmIPX5 Water Flow:12.5±0.62 L/minIPX6 Water Flow:100±5 L/minWater Pressure:AdjustmentPower Supply:380V 50HzHigh Light:

IEC 60529 ingress protection test equipment

,

1mm/min ingress protection test equipment

,

luminaire products IP Testing Equipment

Product Description

IP Testing per IEC Standard 60529,IP Testing equipment per IEC Standard 60529

The second digit indicates the level or protection that the enclosure provides against access to hazardous parts and the ingress of water.

Level Protected against Testing for Details

0 Not protected

1 Dripping water Dripping water (vertically falling drops) shall have no harmful effect. Test duration: 10 minutes

Water equivalent to 1mm rainfall per minute

2 Dripping water when tilted up to 15° Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position. Test duration: 10 minutes

Water equivalent to 3mm rainfall per minute

3 Spraying water Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect. Test duration: 5 minutes

Water volume: 0.7 litres per minute

Pressure: 80–100 kN/m²

4 Splashing water Water splashing against the enclosure from any direction shall have no harmful effect. Test duration: 5 minutes

Water volume: 10 litres per minute

Pressure: 80–100 kN/m²

5 Water jets Water projected by a nozzle (6.3mm) against enclosure from any direction shall have no harmful effects. Test duration: at least 3 minutes

Water volume: 12.5 litres per minute

Pressure: 30 kN/m² at distance of 3m

6 Powerful water jets Water projected in powerful jets (12.5mm nozzle) against the enclosure from any direction shall have no harmful effects. Test duration: at least 3 minutes

Water volume: 100 litres per minute

Pressure: 100 kN/m² at distance of 3m

7 Immersion up to 1 m Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion). Test duration: 30 minutes

Immersion at depth of 1m

8 Immersion beyond 1 m The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects. Test duration: continuous immersion in water

Depth specified by manufacturer

 

Product Introduction

IPX1/2, IPX3/4 ,IP5/6 waterproof degrees test equipment are designed and manufactured according to IEC 60529 < Degrees of protection provided by enclosures (IP Code)>. This equipment is applied in IPX1, IPX2, IPX3 ,IPX4,IPX5 ,IPX6 waterproof degrees testing purposes, which are widely adopted by luminaire products, electrical and electronic products certification institutions, testing organizations and production enterprises for quality control.

 

Application

 

This equipment is suitable for the test of electrical products which are enclosure and sealed in the rain environment whether can ensure the good performance of equipment and components. The scientific design of this equipment, so that the equipment can be realistically simulated dripping water, water spraying, splashing water etc. The application of the comprehensive control system and the frequency conversion technology makes the rotation angle of the test sample rack. The swing angle of the pendulum rod and the swing frequency of the spray water can be adjusted automatically.

 

Technical parameters

Model:KP-IPX1-8

 

IPX1/2

 

1. Drip board area: 800 X800mm

2. Aperture of drop : 0.4mm

3. Pitch-row(mm): 20 mm X 20 mm

4 Delivery rate: Manual(IPX1:1±0.5mm/min, IPX2: 3±0.5mm/min)

5. Product under test (max): 50kg,

6. Turntable speed: 1 RPM ( With Adjustable Speed)

7. Turntable angle: 15°

8. Test time: 0~9999min

 

  

 

IPX3/4

1 Oscillating tubes :R400

2 Oscillate angle: 120º (IPX3), 350º (IPX4) or user-defined ( Adjustable angle)

3 Inner diameter of oscillating tube (mm) : 15

4 Hole Pitch : 50 mm

5 Diameter of blowhole: 0.4 mm

6 Water flow rate per hole : 0.07 L/ min ( Adjustable)

7 Height of turntable: 200-700 mm (Adjustable)

8 Product under test (max): 0-50 kg(can customize)

9 Material of tube: SUS304 stainless steel (Preferred)

10 Duration of test : 0~9999min

11. The drip hole has a protective plate to prevent accidental injury to the operator.

 

 

IPX5/6

 

1 Control system: PLC controlled

3 IPX5 nozzle diameter: 6.3 mm

4 IPX6 nozzle diameter: 12.5 mm

5 IPX5 water flow: 12.5±0.62 L/min

6 IPX6 water flow: 100±5 L/min

7 Water pressure: adjustment

 

 

Structural material:

 

1. High- quality acid -proof stainless steel 304 inner liner.

2. Outer box is made of stainless steel 304.

3. The sample table is equipped with a circular turntable with adjustable speed.

 

Safety protection device:

1. Power overload and short circuit protection
2. Ground protection
3. Water shortage protection
4. Alarm ring prompt
5. 
6.