FAA-CCAR-25 Aviation Parts Flame Tester Appendix F Parts B (4), B (6) And B (7

Description

Detail Information

Power:Electronic,AC 220V,AC 220V/50HZUsage:Flame Testing Equipment,Universal Testing Machine,Textile Testing Instrument,Flammability TesterWarranty:1-2 YearsProduct Name:UL94 Horizontal Vertical Flame Test Equipment,Sand And Dust Test ChamberStandard:UL94,BS.EN.ASTM,IEC60695-11-20 Standard,GB4706.1-2005..High Light:

FAA-CCAR-25 Flame Tester

,

Appendix F Flame Tester

,

AC 220V Flame Test Equipment

Product Description

Product introduction:

 

The instrument is in accordance with part B (4), B (6) and B (7) of Appendix F of ccar-25.

 

The instrument is controlled by PLC and touch screen, which makes the test more automatic and the data easier to extract, and provides independent test procedures for vertical combustion and 45 ° and 60 ° respectively.

 

 

Product specification:

 

Igniter timing: 0 ~ 99.99 seconds, any setting

 

Afterburning time and flame retardant time timer: 0 ~ 99.99 seconds,: ± 0.01 seconds

 

Flame height measuring device: ruler height 38.1 mm

 

Gas used: methane, propane or butane or liquefied petroleum gas or other combustible gas

 

Working power supply: AC220 V, 50 Hz, 50 W

 

Weight: About 70kg

 

 

Product features:

 

The box is painted with transparent observation window

 

Dimension of combustion chamber: length 800mm x width 450mm x height 640mm

 

Electronic automatic ignition

 

The ignition time can be set arbitrarily from 0 to 99.99 seconds, the afterburning time and flame retardant time can be recorded automatically and displayed digitally

 

Adjustable flame height

 

“Push pull” specimen holder fixture

 

The burner is fixed on the sliding track for convenient operation. When it is pushed to the burning position, it will automatically time.

 

The inlet needle valve controls the gas flow and adjusts the standard flame height to 38.1 mm

 

According to different test samples, a variety of sample holders are available; BWF sample size sample holder is customized.

 

Imported brand pressure gauge and pressure regulating valve to regulate gas pressure

 

Two sets of mounting sample holder; vertical combustion sample holder: sample exposure size 50.8mm x 305mm; 45 ° combustion sample holder: sample exposure size 203mm x 203mm

 

The inner diameter of the imported Bunsen lamp is 9.5mm; the lower end of the test must be 19.1mm higher than the top of the lamp

 

The thermocouple is configured to verify the flame temperature of 1000 ℃, and the flame temperature measured in the flame center shall not be lower than 843 ℃

 

The ignition time can be set freely and will be reminded automatically

 

PLC with touch screen microcomputer control system; more automatic experimental process; automatic data recording and storage

 

The system provides 6 ~ 8 sample data storage; the test system can query

 

The system provides two sets of test procedures of vertical combustion and 45 ° combustion