Apparatus For Testing Resistance To Abnormal Heat Of Insulating Sleeves Of Plug Pins , IEC 60884-1 Test Equipment

Description

Detail Information

Standard: IEC60884-1-figure 40, VDE 0620-Bild 39 . INSULATION BOARD: Thick 5±0.2mm METAL PARTS B MATERIAL: Brass BOLT HOLE OF METAL PARTS B: More Than 0.1 Mm High Light:

IEC 60884-1 Plug Socket Tester

,

VDE 0620-Bild 39 Plug Socket Tester

,

Insulating Sleeves Plug Socket Tester

Product Description

Apparatus For Testing Resistance To Abnormal Heat Of Insulating Sleeves Of Plug Pins , IEC 60884-1 Test Equipment

 

 

IEC60884-1 Figure 40 Apparatus for testing resistance to abnormal heat of insulating sleeves of plug pins , IEC 60884-1 test equipment

 

1. Product information:

To determine testing resistance to abnormal heat of insulating sleeves of plug pins, in according to IEC 60884-1 figure 40,This test apparatus consists of an insulating plate A and of a metal part B: between these two parts an air space of 3 mm shall be provided and this distance shall be obtained through means which do not impair the air circulation around the pins.

 

Standard:

IEC60884-1-figure 40, VDE 0620-Bild 39 .

 

Technical parameters:

Insulating part A:

Thick 5±0.2mm, have a diameter equal to twice the maximum permissible dimension of the engagement face of the plug given in the relevant standard sheet

 

Metal part B:

the length is more than 20 mm, brass, five pieces, can be replaced;

Gap between insulation board and metal parts B: 3 mm, ensuring surrounding cross-ventilation

Distance between thermocouple and the metal parts B: 7 mm;

Bolt hole of Metal parts B: more than 0.1 mm;

Equipped with K-type electric heater, imported high-precision digital-display table

Length	20 mm min
Material	Brass
Standard Socked:	choose different country socket
Can be replaced	Yes