Securement Of Pins Australian/NZ Plugs And Socket Outlets AS/NZS 3112:2017 Test
Product Details:
Place of Origin: | China |
Brand Name: | KingPo |
Certification: | Calibration certificate |
Payment & Shipping Terms:
Minimum Order Quantity: | 1 |
---|---|
Price: | To be Quoted |
Packaging Details: | safety carton pack or plywood box. |
Delivery Time: | 30 working days |
Payment Terms: | T/T |
Supply Ability: | 10 sets per month |
- Description
- Reviews (0)
Description
Detail Information
NZ Plugs And Socket Outlets
,
Calibration Certificate Plugs And Socket Outlets
,
Calibration Plugs And Socket Outlets
Product Description
AS/NZS 3112:2017 Test Device for Securement of pins for Australian/NZ Plugs and socket-outletsAS/NZS 3112:2017 Clause 2.13.9 Test Device for Securement of pins 2.13.9 Securement of pins2.13.9.1 Movement of pins Plugs shall be tested for pin movement by clamping the pin or pins not under test in a rigid holding block positioned 5 ±0.5 mm from the plug face and applying a force of 18 ±1 N to the pin under test. The design of the block shall be such that the pin under test shall notcome into contact with the block during the test. Except for non-rewireable plugs, the test shall be carried out without a cord attached to the plug, and with the terminal screws loosened sufficiently to allow a 1 mm2 conductor to be connected. The plug and test equipment shall be preconditioned at a temperature of 40 ±1°C for 1 h,without the test force applied. Throughout the test, all parts of the plug and test equipment shall be maintained at this temperature. For all plugs, the point of application of the force shall be 14 ±0.5 mm from the face of the plug along the pins, and the direction of the force shall be— (a) in both directions along the line perpendicular to the plane of the pin, and passingthrough the centre of the pin; and (b) in that plane in both directions along a line at right angles to that specified inItem (a). Over a period of 10 s, the force shall be gradually applied to each of the pins in the manner prescribed in Items (a) and (b), maintained at its maximum value for 10 s, and then released. The deflection of the pins shall be measured along the line of force relative to theface of the rigid holding block during the period when the force is applied. The maximum deflection shall not exceed 2.0 mm. Following the test on all pins of a plug conforming to Figure 2.1, any distortion 5 min after the completion of the test on the last pin shall be such that it will not prevent the plug from being inserted in the appropriate standard gauges shown in Appendix A, Appendix B andAppendix F without the application of undue force. For other types of plugs, any distortion after 5 min shall be such that will not prevent the plug being inserted into an appropriate socket-outlet without the application of undue force.
Reviews
There are no reviews yet.