Vacuum Cleaner Current – Carrying Hose Wear Testing Machine IEC60335-2-2 Cl.21.102 Resistant To Abrasion

Description

Detail Information

Standard: IEC60335-2-2 Cl.21.102 Purpose: Vacuum Cleaner Current-carrying Hose Wear Testing Machine Crank Rate: 30RPM (speed Can Be Adjusted In The Control Box) Turntable: R150mm / R191mm. Belt Moving Speed: 0.1m/mm (speed Can Be Adjusted In The Control Box) Weights: 1Kg, /1.13KG High Light:

abrasion resistance test machine

,

tv signal tester

Product Description

 

IEC60335-2-2 cl.21.102 Vacuum Cleaner Current-Carrying Hose Wear Testing Machine / Resistant to Abrasion

 

Function Overview:

This equipment is a series of vacuum cleaner test equipment designed according to the requirements of IEC60335-2-2/GB4706.7:201.102 and UL1017-8.14.2.2. During the test, one end of the current-carrying hose is fixed on the slider and then bypass the roller with the abrasive belt, a 1KG./1.13KG weight is attached to the end, and the slider moves back and forth for 100 times.

 

Features:

1. The crank linkage mechanism is installed inside the chassis, occupying small space and being safe.

2. It adopts aluminum alloy structure and aluminum plate surface oxidation treatment, with optimized structure design and beautiful appearance.

3, there is a manual / automatic selection method, easy to measure and adjust the test.

4. The special weight plate is placed on the pallet when the sample is installed. The weight is positioned at this position. The weight and the center distance of the roller are exactly 600mm, which is very convenient to use.

 

Function parameter:

1. Comply with IEC60335-2-2-21-102, GB4706-7: 1999.21.102 standard terms

2, requirements.

3, crank rate: 30RPM (speed can be adjusted in the control box).

4. Turntable: R 150mm / R191mm.

5. Belt moving speed: 0.1m/mm (speed can be adjusted in the control box).

6. Abrasive belt: ISO/DIS6344 requires a size of P100 abrasive belt.

7, weights: 1Kg, /1.13KG.

8. distance between weight and center of the roller: 600mm.

9. Pull out the pallet during installation, put the weight on the pallet position, and then connect with the sample. Distance between The side weight and center of the roller are just 600mm.

10, counting times: 0-999 times (can be set)

 

Main configuration:

1. Speed control motor 2 sets

2, counter 1

3, rail system 1 set

4, crank linkage mechanism 1 set

5, belt drive mechanism 1 set

6, weight 1 set

7, weight pallet 1 set

8, the counter 1

9, photoelectric sensor 1 set

10, control electric box 1 set

11, the body 1 set

12, hose clamp 1 group