Bending Twisting Test Apparatus / Three Stations Curve Torsion Machine

Description

Detail Information

Standard: JIS C3005 FIG.5-(B) Power Supply: AC220V 50HZ 500W Three-station Independent Torsion Speed: 5-60 Laps/min Optional Torsion Angle: 0-±180° (360°) Can Be Set Multi-core Test: Single Off Alarm Stop, Full Off Alarm Stop, Count To Stop, Etc. Alarm Mode: Qualified Prompt Alarm, Unqualified Alarm And Retain Test Times High Light:

High Frequency Spark Tester

,

Bend Test Machine

Product Description

 

JIS C3005 FIG.5-(b) Bending Twisting Test Apparatus / Three Stations Curve Torsion Machine

 

(B)Bending twisting test

Mount a sample of about 1m taked from the finished product,attach this to be a semicircle of r=60D to bending twisting test apparatus of FIG.5-(b).So that the rotor to the appropriate angle(θ,given to the number of time twisting around at a rate of per minute about 60 times ).At this time,not occur a short circuit between the lines,no crack about surface of the insulation and the exterior,and other abnormalities that there is no.

 

Standard requirement:

Number of trials: adjustable

Torsion speed: 60 times / min

Torsion angle: 360°

Weight F: 5N/mm2

Replacement fixture

Sample length: 1000mm

 

Technical Parameters:

1. Power supply: AC220V 50HZ 500W three-station independent

2. Torsion speed: 5-60 laps/min optional.

3. Torsion angle: 0-±180° (360°) can be set

4. Adjustable torsion diameter (R size)

5. Counting times: 9999999 times, can be set, accuracy ± 1 time

6. Servo motor drive

7. Touch screen settings and operations

8. Test mode: continuity test, mechanical test

9. Multi-core test: single off alarm stop, full off alarm stop, count to stop, etc.

Alarm mode: qualified prompt alarm, unqualified alarm and retain test times