Dust Test Chamber As Per IEC 60529/ Sand And Dust Chamber As Per Iec 60529

Description

Detail Information

Standard:IEC 60529,ISO20653Can Perform:Long Time 85 °C/85 % RH TestPower:380V, 50Hz +/- 10%, Three-phase-five-wire SystemHumidity Sensor Dry And Wet Bulb Sensor:Resolution: ± 1%Specimen Power Outlet:Ust-proof Socket AC220V 16ATemperature Range:Ambient To+50°CHigh Light:

IEC 60529 Dust Test Chamber

,

ISO20653 Dust Test Chamber

,

50HZ sand and dust test chamber

Product Description

Dust Test Chamber As Per IEC 60529/ Sand And Dust Chamber As Per Iec 60529  Product Description

 

Sand and dust test chambers are made for the simulation of dust and sand conditions.These test chambersare used for evaluating the effects of dust-filled environments in order to validate product seal integrity. Dust chambers are utlized in automotive, Electro-technical products, Materiel, Coatings, Solar energy, etc.

 

Main technical parameters

Model	K-800	KP-X1000	KP-X1500	KP-X2000
Internal dimensions(mm)	800*1000*1000	1000*1000*1000	1000*1500*1000	1000*2000*1000
Overall dimensions(mm)	1040*1450*1960	1200*1450*1960	1250*1900*1960	1300*2400*1960
Temperature range	Ambient to+50°C
Relative Humidity	<30%RH
Normal wire diameter	50um
Normal width of a gap between wire	75um
The talcum powder amount	2kg~4kg/m3
Fight time	0~99h59m
Fan cycle time	0~99h59m

Specimen power outlet	Dust-proof socket AC220V 16A
Controller	5.7” programmable color display touch scrren controller
Vaccum system	Equipped with a pressure gauga,air filter,pressure regulater,connecting tube
Circulating fan	Enclosed alloy low-noise motor,multi-vane centrifugal fan
Heating system	Independent Nichrome electronic heating system
Powersupply	380V50HZ
Safety devices	Electric leakage, short circuit,over-temperature,motor overheating over current protection/Power failure memory function for controller
Standard	IEC 60529,ISO20653

 

Standard features

♦Temperature control and display unit

♦Humidity control and display unit

♦French TECUMSEH compressor cooling unit

♦Environment friendly refrigerant R404A & R23

♦Humidification system with external isolation, stainless steel surface evaporation humidifier

♦Heating element is Nichrome heater

♦Circulation with low noise centrifugal wind fan

♦Temperature sensor PT-100, Resolution: ± 0.001 ℃

♦Humidity sensor dry and wet bulb sensor, Resolution: ± 1%

♦Build- in water reservoir

♦Programmable color LCD touch screen controller

♦Viewing window with interior lighting

♦Test hole with silicone screw plug.

♦2 pieces of adjustable and removable mesh shelving.

♦Bottom install 4 castors for ease moving, andwith brakes function

♦R-232 (R-485) interface, PC Link, communication with LAN network interface

♦Programs reach to 999 groups and 999 sections

♦Safety protection system

♦Interior material is high quality SUS304 stainless steel

♦Exterior material is steel plate with protective coating

♦Thermal insulation is Polyurethane foam

♦Automatic water supply, water purification system

♦Silicon seal for door

♦Can perform long time 85 °C/85 % RH tests

♦380V, 50Hz +/- 10%, three-phase-five-wire system

♦Standard and features