Flexible Lighting Cord Winding Tester

Description

Detail Information

Standard: Chapter 6.14 And Fig.3 Of IEC60598-2-20：2002、GB7000.9-2008 IP20 Lighting String: 25℃±5℃ ;10 Times More Than IP20 Lighting String: 25℃±5℃ ;10 Times Device Material: Molding Aluminum Ooden Cylinder: Ø250mm Weight: One,60N Method: Power-driven Trial Number: 1-99999times;can Be Preset High Light:

led testing equipment

,

led lamp testing equipment

Product Description

 

Flexible Lighting Cord Winding Tester

 

Device Briefing:

 

Flexible Lighting Cord Winding Tester meets requirements of Chapter 6.14 and Fig.3 of IEC60598-2-20:2002,GB7000.9-2008 standard;used for checking whether lighting string has enough mechanical strength.

 

Technical Parameters:

 

Repeat each of the following test 45 times for inspection on rigid lighting string’s qualification:

a )60N pulling force acting on the bottom of the pipe not all of a sudden for 1 min.

b )0.15N·m torque,acting on the bottom of the pipe at the most disadvantageous direction(optionally when questioned ) not all of a sudden for 1 min; (used with torsion device)

Soft lighting string’s qualification checki needs to have the following additional test after step a )and b )

Test:act on 60N pulling force;wind the soft pipe onto a cylinder at a diameter of 250mm.Winding times and environmental temperature depend on:

 

—IP20 lighting string:25℃±5℃ ;10 times

—more than IP20 lighting string: 25℃±5℃ ;10 times

Then repeat 10 times ranging－15℃±5℃

Device material:molding Aluminum；

Wooden cylinder:Ø250mm；

Weight:one,60N；

method:power-driven；

Trial number:1-99999times;can be preset.