IEC 62368-1 Annex E Pink Noise Generator,Meets The Requirements For Pink Noise In IEC 60065 Clause 4.2 And 4.3

Description

Detail Information

Weight: 4kg Dimensions: 290x270x60 Mm (LxWxH) Supply: 220 VAC 50 Hz Standards: IEC60065.IEC62368 Channels: 0° Or 90° Pink Noise: 1000 Hz High Light:

IEC 62368-1 Pink Noise Generator

,

IEC 60065 Pink Noise Generator

,

1000 Hz Pink Noise Generator

Product Description

This Pink Noise Generator meets the requirements for pink noise in IEC 60065, Clause 4.2 and 4.3 and IEC 62368-1, Annex E.
It is especially developed for all types of tone frequency amplifiers,when you need 2 channels/phase 90°
Technical Specification
•Pink noise or sine wave 1000 Hz (not at the same time)Pink Noise Generator for Audio Testing.docx

•Two output channels when testing
•The channels can be phase shifted to 0° or 90°
•Fine adjustments of output voltage
•RCA and 4 mm banana type output connectors
•Audio-cables for test object included (RCA and 3,5 mm phono)
•Output signal according to IEC 60065 Annex C, fig. C1 (IEC60268)
•Amplitudes of sine wave and pink noise according to table below:
Output Voltage           Sine wave 1 kHz                      Filtered pink noise
Low:                            0-100 mV/1 kohm                 0-35 mV rms/1 kohm
Medium:                      0-1 V/1 kohm                       0-350 mV rms/1 kohm
High:                            0-5 V/1 kohm                       0-1,7 V rms/1 kohm
 




 
 

IEC&ISO Test Equipment

Battery Testing Equipment IEC62368 Test Equipment

Automobile testing equipment IEC62087 Energy efficiency test equipment

 

IEC standards