IEC60238-Figure 36 Dielectric Strength Test Equipment For Testing Surge Strength ,

Description

Detail Information

Standard: IEC60065 Figure 6 And UL1310 Clause 40.2 Metal Pin: φ5 Mm，mass Of 100 G & φ6.35 Mm Mass Of 50 G Matel Club Weight: 100±2g Matal Pole Diameter: 5±0.1mm Max Measure Range: 20mm Max Strength: <12KV High Light:

electrical safety analyzer

,

tv signal tester

Product Description

 

 

IEC60065 Dielectric Strength Test Instrument for Electrical safety testing

 

1. Application:

The equipment is designed according to IEC60065 and UL1310

clause 40.2, with upper metal pin having a 5 mm diameter ,mass of 100 g and a 6.35 mm diameter, mass of 50 g, lower metal pin and frame holder.

 

It’s mainly used for testing thin-layer insulation material electric strength. Stand part of the test device using the whole structure, made of 304 plate material processing. To improve the insulation board and creepage dielectric properties, surface brushed polished, bottom bracket the minimum distance from the edge of >35mm, the altitude of 2000 meters designed to meet the strength test requirements of 12KV.

 

Also meets:IEC60238 Figure 36 – Example of electric strength test instrument for solid insulation

 

2.calibration certificate.pdf

 

3. Parameter

Main Parameter	Technical Index
Metal Pole Diameter	5mm for 100g pin, 6.8mm for 50g pin
Metal Pin Weight	50g and 100g, each 1 piece
Metal Pin Diameter	5mm for 100g pin, 6.8mm for 50g pin
Standard	IEC60065, GB8898,UL1310