IEC60745-2-5 Circular Saw Switch Endurance And Lower Guard Recovery Time Test Device

Description

Detail Information

Standards: IEC60745-2-5, EN 60745-2-5: 2010 Power Supply: 220V/50HZ Electrical Control: Mitsubishi 7-inch Touch Screen PLC Operation Drive: Motor Driven Size: 80*70*100cm Weight: 80kg High Light:

Circular Saw Switch Endurance Test Device

,

Circular Sa Recovery Time Test Device

,

IEC60745-2-5 Durability Testing Device

Product Description

IEC60745-2-5 Circular Saw Switch Endurance And Lower Guard Recovery Time Test Device  Comply with standards: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. Model:YW-1185 Purpose: Test the mechanical strength, durability test and recovery time test of the lower protective cover. Sample range: circular saw Structure and function: The circular saw is set to cut at 90°, showing a horizontal position. The lower protective cover repeats the cycle from fully closed to fully open, releasing 50,000 times at a rate of not less than 10 cycles per minute.the number of times recorded by the position sensor.After the cycle operation, the response time of the lower protective cover is not more than 0.3s. If it exceeds 0.3s, the number of timeouts will be counted once. After the equipment runs for the number of tests, record the recovery time of the last lower protective cover, and the equipment automatically shuts down. Technical Parameter:

No.	Items	parameter	remark
1	power supply	220V/50HZ
2	Electrical control	Mitsubishi PLC operation, 7-inch touch screen operation
3	drive	motor driven
4	Number of test	0-999999 times, can be preset
5	Detection time	0-9.99s, can be displayed	recovery time
6	Auto/manual speed	0-30°times/minute, can be preset
7	Manual state rotate clockwise/counterclockwise	Touch control
8	size and weight	80*70*100cm, weighs about 80kg;