Description

Detail Information

50w/500w Burner:Inside Diameter Of Φ9.5mm ± 0.3mmTest Angle:0°、20°、45° Manual ConversionIgnition Exertion Time:0-999.9s±0.1s AdjustableResidual Flame:0-999.9s±0.1sResidual Broil:0-999.9s±0.1sNeedle Flame Burner:Inside Diameter 0.5 Mm ± 0.1 MmHigh Light:

Needle Flame Tester

,

50 W flames tester

,

50 W Flammability Testing Equipment

Product Description

 

Needle Flame Tester , 50 W flames tester , 500W flames tester, Flammability Testing Equipment

 

1.50 /500 W flames tester

Brief Introduction

 

Horizontal Burning Test:UL HB,IEC 60695-11-10,IEC 60707,ISO 1210

50W Vertical Burning Test :UL94 V0,V1,V2,IEC 60695-11-10,ISO 1210,IEC 60695-11-4
500W Vertical Burning Test :UL94 5VA,5VB,IEC 60695-11-20,ISO 9770,IEC 60695-11-3
Membrane Material Vertical Burning Test :VTM-0,VTM-1,VTM-2,ISO 9773
Foam Material Horizontal Burning Test:HF-1,HF-2,HBF,ISO 9772

Reference standard of horizontal and vertical burning test are UL94-2006,IEC 60695-11-4 ,IEC 60695-11-3 ,IEC60950;it adopts Bunsen burner in required size and required ignition gas source(methane or propane);exert ignition on the horizontal or vertical specimen at a certain height and ignition exertion angle at regular time;use specimen ignition,lasting time and combustion length to evaluate its combustibility and fire fatalness.

 

The tester is mainly aimed at evaluating rank of material combustibility at class of V-0 , V-1 , V-2 , HB , 5V ;suitable for research,production and quality testing department of electrical and electronic devices and component parts like lighting equipment,low voltage apparatus,household appliance,machine tool electric appliance,motor-driven machine,electric tool,electronic instrument,suitable for insulating material,engineering plastics and other solid combustible material industry.

 

Technical Parameter

1, burner:1 set of Bunsen burner at an inside diameter of Φ9.5mm ± 0.3mm
2, test angle:0°,20°,45°manual conversion
3, flame height:20mm ± 2mm ~180mm±10mm adjustable
4, ignition exertion time: 0-999.9s±0.1s adjustable
5, residual flame: 0-999.9s±0.1s,automatic record,suspension by wire
6, residual broil: 0-999.9s±0.1s,automatic record,suspension by wire
7,  gas: 98% methane gas
8, Flow and Pressure:double Flowmeter and pressure gauge(gas and air)
9, temp. test range:0~1000℃
10, flame temp. requirement:from 100℃±5℃ rise up to 700℃±3℃ within 44±2s(50w)  54s±2s(500w)
11, thermocouple:K tyoe Φ0.5mm accuracy±0.05%.
12, test procedure:manual control with independent ventilation
13, Reference standard:UL 94-2006,IEC 60695-11-3,IEC 60695-11-4
14, studio area:bigger than 0.75 cubic meter(size can be customized)
15, external dimension:1200mmW×700mmD×1400mmH
16, control:PLC touch screen+button type double control system,high accuracy temperature gauge,independent electrical control system,strong anti-interference.
17, operation with high efficiency:One-touch operation ,fast and highly effectively

 

 

2.Needle Flame Tester

Brief Introduction

Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11-5.

Technical parameters:

Needle burner	inner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel
Burner angle	0,° 45° (adjust flame height)
Thermocouple	Ø0.5mm Type K (Ni/Cr – Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C
Burning time	0-999.9 s ± 0.1 s adjustable (usually selected for 30s)
Hold Burning time	0-999.9 s ± 0.1 s, automatic recording, manual timeout
Flame Height	12mm ± 1mm (with height measurement instruments)
Flame Gas	Butane gas, min. 95% purity
Temperature Test Range	0~1000°C
Flame Temperature Requirements	from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds
Standard Copper Block	4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP
Test process	automatic control, independent convulsions
Chamber	0.53 m³
Size	W1100mm×D700mm×H1300mm,inside volume:0.78m³
Control	PLC+ touch screen control
Consult standard	IEC60695-11-5
Power Supply	300VA ,220V, 48-60Hz
Display panel language	Chinese + English (adjustable)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The position of the calibration copper block can be adjusted freely

 

1.500 w flowmeter
2.Needle Flame flowmeter
3.50 w flowmeter
4.50W/500W gas pressure gauges
5.. 50W/500W regulating valve