Servo Motor Load Test Equipment / Loading Test System L600*W600*H1015 Cabinet

Description

Detail Information

General Parameter Measurement: Electrical, Mechanical Parameters,motor Efficiency, Temperature. Test 1: Load Characteristics And Endurance Tests Diagram: T-N Curve And Five-axis Diagram Test 2: No-load And Lock Rotor Test Test 3: Driver Voltage Current And Efficiency Test Test 4: Drive Dynamic Response Test And Analog Load Characteristic Test Signal Converter: Connect Three Dynamometers And Manually Select The Dynamometer To Be Used Motor Fixture: Can Be Adjusted Up And Down Loading: Manual,automatic Report: Default Or Customized Template High Light:

electric motor test bench

,

electric motor testing equipment

Product Description

 

Name: Servo motor loading test system

Model Number: CMT-1030SM

Product introduction:

CMT-1030SM servo motor loading test system mainly uses hysteresis dynamometer to detect servo motor and stepper motor T-N curve and maximum stall point. The speed of the motor is controlled by the motor driver, and the locked-rotor torque is measured at different speeds of the motor through hysteresis dynamometer loading, and the PN curve is plotted. The load can be adjusted at a high speed to achieve continuous load change loading. Actual test conditions change.

 

General parameter measurement

1. Electrical parameters: motor operating voltage, current, power factor, input power, resistance;

2. Mechanical parameters: motor running speed, torque, mechanical power;

3. Other parameters: motor efficiency, temperature.

• Load characteristics and endurance tests

• T-N curve and five-axis diagram

• No-load and Lock rotor test

• Driver voltage current and efficiency test

• Drive dynamic response test and analog load characteristic test

 

Selection reference

Controller model	Sampling speed	Available Communication Protocol	Communication Method	Providing Test Software	Features
HDC-1010	5-10PCS/S	Yes	RS-232	no	Simple operation, low price, suitable for ordinary production lines
HDC-1010-S	5-10PCS/S	Yes	RS-232	Yes
HDC-1020	20PCS/S	no	USB2.0	Yes	Fast collection speed and wide test range, suitable for common production lines and common experiments
HDC-1030	25PCS/S	no	USB2.0	Yes
HDC-1040	100PCS/S	no	GPIB/RS232	Yes	Fast acquisition speed, wide test range and strong anti-interference performance, suitable for production lines and laboratories with high requirements
HDC-2010	100PCS/S	no	GPIB/RS232	Yes

 

Software introduction

TN curve test setting interface

 

Configuration

No.	Component	Technical requirements
1	Dynamometer controller	HDC-1030 controller adopts RS-232 communication and high communication speed.
2	Industrial Control Computer with 19" Monitor	Inter CPU; 4G or above running memory; 500G or above hard disk ASUS motherboard.
3	Electrical parameter tester	Single-phase AC/DC parameters instrument, maximum detection voltage 600V, voltage 50A
4	Dynamometer	Natural cooling; torque 1.2KG ~ 6Kg.cm, torque accuracy ± 0.5% FS full scale; speed 10 ~ 3600rpm, speed accuracy ± 0.2% FS full scale. Short-term (in 5 minutes) operating power of 1400W, long-time operating power of 300W.
5	Dynamometer	Natural cooling; Torque 0.6 ~ 3Kg.cm, torque accuracy ± 0.5% FS full scale; speed 10 ~ 3600rpm, speed accuracy ± 0.2% FS full scale. Short-term (in 5 minutes) operating power of 1400W, long-time operating power of 300W.
6	Dynamometer	Natural cooling; torque 100g ~ 500g.cm, torque accuracy ± 0.5% FS full scale; speed 100 ~ 25000rpm, speed accuracy ± 0.2% FS full scale. Short-term (in 5 minutes) operating power of 1400W, long-time operating power of 300W.
7	Cabinet	L600*W600*H1015
8	Signal converter	Connect three dynamometers and manually select the dynamometer to be used. The system will automatically convert all signals.
9	Motor fixture	Can be adjusted up and down
10	Motor Test System	Chinese interface; with manual loading, automatic loading, fixed-point torque testing, full-scale testing and other functions, can output and save data reports and curve report functions. If you need to customize the report form, please provide the corresponding template. If not provided, export the report according to our default template.